1. Scope of Warranty Coverage 1. Failures rendering the entire vehicle inoperable due to premature abnormal wear, deformation, cracks, or similar issues arising from defective design or manufacturing of components; 2. Failures preventing normal operation caused by defects in forged, cast, or welded parts; 3. Leaks of air or oil resulting from poor manufacturing or assembly quality; 4. Failures causing severe abnormal noises that prevent normal operation; 5. Failures preventing normal operation caused by inherent quality defects in the vehicle itself.

Motorcycle Starting Tips 1. The electric start button may be pressed repeatedly, but each press should not exceed 2-3 seconds, otherwise it will accelerate battery power drain. After one failed start attempt, pause for 5 seconds before trying again! 2. When starting, ensure the throttle opening is neither excessive nor insufficient. Avoid inadvertently twisting the throttle, causing it to be either too wide or too narrow. If multiple consecutive starting attempts fail, pause to identify the cause. 3. During cold starts, petrol fails to mix adequately with air, causing abnormal throttle response. This may result in engine backfiring, vibration, or stalling. Persisting with repeated forceful throttle adjustments under these conditions leads to excessive fuel supply, causing carbon deposits in the combustion chamber and spark plugs. Therefore, avoid forcing cold starts. Allow the engine to idle for 2 minutes to warm up before proceeding.